linkheight=5;
linkwidth=5;
linklen=44+5+5;  // 44 is the screw to screw distance.
                                  // though we dont print the screw holes.

stepheight=8.4;  // *0 to make the bar/strut that stablises the servo.
steplen=8;

kinklen=24;

translate([0,0,stepheight])
   cube([steplen,linkwidth,linkheight]);
translate([steplen+kinklen,0,0])
cube([linklen-steplen-kinklen,linkwidth,linkheight]);

hull()
 {
translate([steplen,0,stepheight])
    cube([1,linkwidth,linkheight]);
 
 #translate([steplen+kinklen,0,0])
cube([1,linkwidth,linkheight]);
 }